GNSS antenna PRO-ANT
About the device
PRO-ANT is GNSS antenna with highly stable phase center. The antenna is mounted on a standard pole (5/8-11″ thread). The antenna cable is connected to a standard TNC connector located on the antenna body. The antenna has a high degree of dust and moisture protection IP68 and is capable of operating in the harshest conditions.
The PRO-ANT antenna is capable of receiving signals of GPS, GLONASS, Galileo, BeiDou, IRNSS L5, WAAS, EGNOS, MSAS, GAGAN и QZSS.
Documentation
The device documentation is available here
Main technical parameters
Electrical parameters
Antenna gain
5.0 dB (typical): 1551-1614 MHz
4.0 dB (typical): 1164-1300 MHz
Ellipticity coefficient
3.0 dB (max.)
Output impedance
50 Ohm
LNA gain
32±2 dB, 40±2 dB (optional)
LNA noise figure
1.7 dB (typical)
Supply voltage
3.0-15.0 V
Consumption current
25 mA (max.) @ 5 V
32 mA (max.) @ 40 dB LNA gain
Power consumption
0.40 W
0.50 W @ 40 dB LNA gain
Signals
Signals received
GPS L1/L2/L2C/L5,
GLONASS L1/L2/L3,
Galileo E1/E2/E5ab/E6,
BeiDou B1/B2/B3,
IRNSS L5,
WAAS L1/L5, EGNOS,
MSAS, GAGAN,
QZSS L1/L2/L2C/L5/LEX
Operating frequency
1551-1614 MHz
1164-1300 MHz
External influences
Operating temperature range
From -45 °C to +85 °C
Storage temperature
From -50 °C to +85 °C
Moisture resistance
Waterproof, IP68
Mechanical parameters
Antenna type
Microstrip, with 4 feed points
Dimensions (L х W х H)
160 х 160 х 70 mm
Weight
600 g
Output connector
TNC (female)
Mount
5/8-11″